Description

Signature model of Zenon Ishikawa, bassist of St. Kangaroo II, a cult that propagates Satanism through the medium of music.
Constructed with 2-piece ash body, maple neck, and maple fingerboard.
The original pickups and the original preamp EQ-XII output a high power bass sound with good punch. Equipped with hip-shot Xtender Keys, down-tuning, which is important for hard rock and heavy metal, can be improvised.
The top of the body is painted with a signature that may be his own.

The jack and battery snap have been replaced due to deterioration of the jack green-blue and battery snap wiring.
A badass bridge has been installed, but it is unknown if it is original.
There are some scratches and dings, and the guitar is moderately used.
The neck is slightly twisted and wavy, but there are no problems with playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: Japan
Case: Original soft case
Weight: 5.44kg
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees left and right (not much left).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 37.8mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.6mm
SCALE: 864mm (34″)
RADIUS: 241mm (9.5″)
Strings in setup: D’Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

Specs: D’Addario EXL165 / .045-.105 set

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Country of manufacture
Japan

Case
Genuine soft case

Weight
5.44kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above the 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
37.8mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
22.6mm

Scale
864mm (34″)

RADIUS
241mm (9.5″)

Strings for setup
D’Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair